Smith And Wesson 586 Serial Number Lookup

Smith & Wesson Model 586
586-7 Revolver with 7-round capacity and factory wood grips and hammer lock
TypeRevolver
Place of originUnited States
Production history
ManufacturerSmith & Wesson
Produced1981–1999, 2012–present
Variants586-(1 through 8)
686 (stainless steel)
Specifications
Cartridge.357 Magnum
.38 Special
ActionDouble action and single action
Feed system6-round or 7-round cylinder
SightsAdjustable rear open sights
  1. Smith And Wesson 586 4 Inch Serial Number Lookup
  2. Smith And Wesson 586 Nickel For Sale

The Smith & Wesson Model 586, is a six- or seven-shot double-actionrevolver chambered for the .357 Magnumcartridge; it will also chamber and fire .38 Special cartridges. The Model 586 has a carbon steel construction and is available in a blued or nickel finish; it is essentially the same firearm as the Model 686, which has stainless steel construction. It is also known as the Distinguished Combat Magnum.

Smith & Wesson 586-1 with 6 inch barrel
Smith And Wesson 586 Serial Number Lookup

The best thing that a Smith&Wesson enthusiast can invest in. Serial numbers starting with BPE were produced around November.A Guide to Smith & Wesson.38 Special. Done except Smith & Wessons revolver model numbers have all been. The serial number and model numbers are but i am.2006-11-12  smith and wesson 586 serial numbers. The Smith & Wesson Model 586, is a six- or seven-shot double-action revolver chambered for the.357 Magnum cartridge; it will also chamber and fire.38 Special cartridges. The Model 586 has a carbon steel construction and is available in a blued or nickel finish; it is essentially the same firearm as the Model 686, which has stainless steel construction.

Smith And Wesson 586 4 Inch Serial Number Lookup

Description[edit]

In addition to being able to chamber and fire .357 Magnumcartridges, the 586 will chamber and fire .38 Specialcartridges as well as .38 Special +P (overpressure ammunition). The 586 has been available with 2½ in, 3 in, 4 in, 6 in, and 8⅜ in (64, 76, 102, 153, and 214 mm) barrel lengths as standard models and other barrel lengths either by special order from S&W's Performance Center custom shop, or acquired from or built by after-market gunsmiths.[1] The barrel has a twist rate of 1/18.75 for the 158 grain bullet.[citation needed]

The Model 586 uses S&W's L (medium) revolver frame, with a K-frame-sized grip mated to a larger diameter cylinder. During the 1980s, Smith & Wesson developed its L-frame line of .357 Magnums: the Model 581, Model 586, Model 681, and Model 686. The Model 581 had a fixed notch type rear sight, whereas the 586 used a target style adjustable rear sight. These handguns had a major effect on both law enforcement and sporting markets. The 586 was introduced in 1980, while the 581 was discontinued in 1988.[1]

The K-frame guns, though popular with police departments, were felt to be too light for full-power .357 ammunition, and a heavier and more durable gun was desired, in the same frame size. (This would avoid the complaints attaching to the larger, heavier N-frame Model 29 and Model 58.[2]) Designed with input from official S&W historian Roy Jinks, the L-frame was the result, and it quickly gained praise from policemen and hunters.[1]

The 586 was discontinued in 1999. After a 13-year absence, it was reintroduced in 2012 with the aforementioned safety modifications, plus an improved yoke, as the 586-8 variant.[1] These are produced with 4- and 6-inch barrel lengths, as part of Smith & Wesson's Classic line of revolvers.

Engineering and production changes[edit]

  • 586 (no dash), 1980 Introduction model
  • 586-1, 1986 radius stud package, floating hand
  • 586-M, 1987 Product warning by S&W: M over stamped to signify a modification by factory or warranty station for 586 and 586-1
  • 586-2, 1987 changed hammer nose, bushing and associated parts
  • 586-3, 1988 new yoke retention system
  • 586-4, 1993 change rear sight leaf, drill and tap frame, change extractor, Hogue grips
  • 586-5, 1997 delete 8 3/8' barrel/change to MIM thumbpiece/Ship with Master trigger locks
  • 586-6, 1997 change frame design to eliminate cylinder stop stud, eliminate serrated tangs, MIM hammer and trigger, change to internal lock.
  • 586-7, 2004 Performance Center .38 Super, 6-Shot unfluted cylinder, 4' barrel, Stainless Steel, 250 Made, seven shot with internal lock
  • 586-8, 2012 Reintroduction as a Classic Series with internal lock 6-shot 4' and 6' RR, WO TS SB[3]

Recall[edit]

In 1987, seven years after the release of the Model 686, there were reports of cylinder binding with some types of standard .357 Magnum ammunition for L-frame revolvers manufactured before August 1987. S&W published a product warning and authorized free modification the revolver. All affected revolvers repaired for this recall were stamped with an M on the yolk near the model number. Thus it is known as the M modification for all 686, 686-1, 586-1, and 586-2 revolvers.[4]

References[edit]

  1. ^ abcdStandard Catalog of Smith & Wesson; 3rd Edition (Gun Digest Books, 2006)[page needed]
  2. ^'Smith & Wesson's .41 Magnum', Free Patriot Web site. Accessed August 6, 2008.
  3. ^Supica, Jim; Hahas, Richard (2016). Standard Catalog of Smith and Wesson (4th ed.). Iola, WI: Gun Digest. p. 298. ISBN978-1-4402-4563-3. Retrieved 6 January 2020.
  4. ^Product Warning, Popular Mechanics, January 1988, p. 11.
Retrieved from 'https://en.wikipedia.org/w/index.php?title=Smith_%26_Wesson_Model_586&oldid=1040223426'
Smith And Wesson 586 Serial Number Lookup

The 686 no dash you reference, by the advanced serial # (AJV) would indicate manufacture in '85/'86, about the time the -1's were coming out.

Smith & Wesson Model 686
A Smith & Wesson Model 686, with a 100 mm (4 in) barrel.
TypeRevolver
Place of originUnited States
Service history
Used bySee Users
Production history
Designed1980
Produced1981–1999, 2012–present
Variants
Specifications
Mass1.25 kg (2.8 lb)
Length305 mm (12.0 in)
Barrel length
  • 64 mm (2.5 in)
  • 76 mm (3 in)
  • 100 mm (4 in)
  • 150 mm (6 in)
  • 211.5 mm (8.325 in)
Cartridge
Caliber.38
ActionDouble action and single action
Feed system6-round (686) or 7-round (686 Plus) cylinder

The Smith & Wesson Model 686 is a six- or seven-shot double-actionrevolver manufactured by Smith & Wesson and chambered for the .357 Magnumcartridge; it will also chamber and fire .38 Special cartridges. Smith & Wesson introduced the Model 686 in 1981. It is the stainless steel version of the Model 586, which featured a blued steel finish. They are available ported and unported with a choice of 6- or 7-round cylinders.[1]

The Model 686 is based on S&W's L (medium) revolver frame. During the 1980s, Smith & Wesson developed its L-Frame line of .357 Magnums: the Model 581, Model 586, Model 681 and Model 686. The Models 581 and 681 have fixed sights, whereas the 586 and 686 use adjustable sights.[2]

  1. 1972-1974 I keep this list in my computer to help out when buying guns online at auction. N Frame serial numbers ran from 1970 -1983. The guys at the Smith and Wesson forum are great and always ready to help out. Make sure to read the threads first, however before asking your question.
  2. Smith Wesson 686 Serial Number Search DOWNLOAD (Mirror #1) ccb82a64f7 Browse all new and used Smith & Wesson Revolvers - Model 686 for sale and buy with confidence from Guns International.The majority of gun owners stuck with the tried and true classics of the era: the D-Frame Colt, the J-Frame Smith & Wesson or the odd man out, the Charter Arms.Browse all new and used Smith & Wesson.
  3. Smith Wesson Dates Of Manufacture From Serial Numbers DOWNLOAD.
  4. Visit the post for more. S w k frame serial numbers smith and wesson 19 serial numbers serial number lookup smith and wesson smith and wesson serial numbers.

Variants of the 686[edit]

The 686 has been available with 64, 76, 102, 127, 152, and 211 mm (2.5, 3, 4, 5, 6, and 8.325 in) barrel lengths as standard models and other barrel lengths either by special order from S&W's Performance Center custom shop, or acquired from or built by after-market gunsmiths. The Performance Center made a limited number of Model 686s chambered for .38 Super cartridges for competitive shooters.[1]

The 686 features a 6-round cylinder. The 686P variant, marketed as the Model 686 Plus, has a 7-round cylinder. The 686PP variant, with PP designating PowerPort, has an integral compensator (also known as a muzzle brake).

The 686 has been made with pistol grips having a squared or rounded end (colloquially, 'square butt' or 'round butt'). The grips on the pistol can be changed, and multiple after-market options are available.

The Model 686 has an adjustable rear sight, and until 1992, the 152 and 211 mm (6 and 8.325 in) versions had the option of an adjustable front sight. They had Goncalo alveshardwood grips until 1994, when the grip was replaced by a rubber Hogue grip.[1]

Through the years, there have been several variations on the Model 686. The Model 686 Classic Hunter was introduced in 1988 and has a 150 mm (6 in) barrel and a non-fluted cylinder; the Model 686 Black Stainless was introduced in 1989 and has either a 100 or 150 mm (4 or 6 in) barrel with a black finish, with production limited to 5000; the Model 686 National Security Special was introduced in 1992 and has a 76 or 102 mm (3 or 4 in) barrel; the Model 686 Target Champion was introduced in 1992 and has a 150 mm (6 in) match-grade barrel, adjustable trigger stop, and walnut grips; the Model 686 Power Port was introduced in 1994 and has a ported 150 mm (6 in) barrel; the Model 686 Plus was introduced in 1996 and has a 64, 76, 102, or 152 mm (2.5, 3, 4, or 6 in) barrel, adjustable sights, 7-shot cylinder, and Hogue rubber grips. As with all current Smith & Wesson revolvers, the 686 Plus now has a key lock integral to the frame of the gun.[1]

VariantCaliberWeightCapacityYearNotes
1.30 kg
(45.8 oz)
6 rounds1988Unfluted cylinder
  • S&W 686-3 Midnight Black
  • 100 or 150 mm (4 or 6 in) barrel
1.19 kg
(42 oz)
6 rounds1989Black finish over stainless, 5000 produced
1.15 kg
(40.5 oz)
6 rounds1988
  • S&W 686
  • 100 mm (4 in) barrel
1.19 kg
(42 oz)
6 rounds1988
1.30 kg
(45.8 oz)
6 rounds1988
  • S&W 686
  • 211 mm (8.325 in) barrel
1.37 kg
(48.3 oz)
6 rounds1988
S&W 686 CS-1Un­knownMade for United States Customs Service
  • .357 Magnum /
  • .38 Special
1.17 kg
(41.2 oz)
6 rounds1992Black finish
1.19 kg
(42 oz)
6 rounds1992Black finish
  • S&W 686 Target Champion
  • 150 mm (6 in) match-grade barrel
1.31 kg
(46.2 oz)
6 rounds1992Full lug
1.30 kg
(46 oz)
6 rounds1994Ported
  • S&W 686P
  • 64 mm (2.5 in) barrel
1.16 kg
(41 oz)
7 rounds1996Lockable with key
1.20 kg
(42.3 oz)
7 rounds1996Lockable with key
  • S&W 686P
  • 150 mm (6 in) barrel
1.31 kg
(46.2 oz)
7 rounds1996Lockable with key
1.15 kg
(40.5 oz)
7 rounds2004Half-lug barrel, HiViz front sight
  • S&W 686 'The Presidents'
  • 150 mm (6 in) barrel
1.31 kg
(46.2 oz)
6 rounds2003Brushed gold finish with finger hardwood grips
1.31 kg
(46.2 oz)
6 roundsIntegral Compensator, lockable with key
  • S&W 686 Performance Center
  • 150 mm (6 in) barrel (weighted)
1.50 kg
(52.9 oz)
6 rounds2007Weighted barrel, Weaver/Picatinny rail on barrel, adjustable/removable weights, ball-bearing cylinder lock, forged Hhmmer and trigger, traditional old school pinned sSear, PC aluminum case or gun rug, lockable with key

Engineering and production changes[edit]

Photo of a Smith & Wesson 686 firing a .38 Special round, taken with an ultra high-speed flash (air-gap flash)
  • 686 (no dash), 1981 Introduction model
  • 686-1, 1986 radius stud package, floating hand
  • 686-2, 1987 changed hammer nose, bushing and associated parts
  • 686-3, 1988 new yoke retention system
  • 686-4, 1993 change rear sight leaf, drill and tap frame, change extractor, Hogue grips
  • 686-5, 1997 change frame design to eliminate cylinder stop stud, eliminate serrated tangs, MIM hammer and trigger, change internal lock.
  • 686-6, 2001 internal lock
  • 686-7, 2003 Performance Center .38 Super, 6-Shot unfluted cylinder, 4' barrel, Stainless Steel, 250 Made

Gallery[edit]

Users[edit]

  • France – Used by GIGN during amphibious operations.[3]
  • Norway – The 3'-barreled version with Goncalo alveshardwood-grip was used as a sidearm in the alien immigrant-branches of the Norwegian Police Service by individual plainclothes officers during the early 1990s.[citation needed]
  • United States – Used by U.S. Border Patrol.[citation needed] Used by legacy U.S. Customs Service.[citation needed] Used by the legacy U.S. Immigration and Naturalization Service[citation needed] Used by U.S. Navy SEALs during waterborne missions.[4] Used by some smaller police departments and by individual officers in larger departments, especially in marine environments.[5]
  • Luxembourg – Used by the Luxembourg Grand Ducal Police as duty weapon from the 1980s through 2017 when it was replaced by the HK VP9.[6]
  • United States - Used by the Oso Grande 4x4 Posse as an approved weapon for posse members preferring a revolver. Some twenty revolvers were acquired in the early 2000's as issue/approved weapons.

Recall[edit]

In 1987, seven years after the release of the Model 686, there were reports of cylinder binding with some types of standard .357 Magnum ammunition for L-frame revolvers manufactured before August 1987. S&W put out a product warning and authorized a no-charge upgrade to make modifications to the revolver. All recalled and reworked guns were stamped with an M marking, signifying that they had been recalled and fixed; thus it is known as the M modification for all 686, 686-1, 586-1, and 586-2 revolvers.[7]

References[edit]

  1. ^ abcdSupica, Jim; Richard Nahas (2007). Standard Catalog of Smith & Wesson (3 ed.). F+W Media, Inc. pp. 331–363. ISBN978-0-89689-293-4.
  2. ^Boorman, Dean K. (2002). The History of Smith & Wesson Firearms. Globe Pequot. p. 119. ISBN978-1-58574-721-4.
  3. ^Jim Supica (2011). Standard Catalog of Smith & Wesson 3rd. Iola, wisconsin: Gun Digest Books. p. 343. ISBN978-1-4402-2700-4.
  4. ^Chalker, Denny; Dockery, Kevin (2009). One Perfect Op. New York: Harper Collins. p. 104. ISBN978-0-06-175129-5.
  5. ^Sweeney, Patrick (2011). The Gun Digest Book of Smith & Wesson. Iola, Wisconsin: Gun Digest Books. p. 104. ISBN978-1-4402-2714-1.
  6. ^'So sieht die neue Pistole der Police Grand-Ducale aus'. L'Essentiel. 19 January 2017. Retrieved 19 January 2019.
  7. ^Product Warning, Popular Mechanics, January 1988, p. 11.

External links[edit]

Retrieved from 'https://en.wikipedia.org/w/index.php?title=Smith_%26_Wesson_Model_686&oldid=991770537'

Serial Numbers on Smith and Wesson Firearms

If you own a Smith and Wesson handgun, you might be interested in finding out some more information on your particular gun. Once you locate the serial number, then you are able to do some research and find out a little history on your gun. Below you will find some visual examples of where to look for the serial number on your S&W handgun. You can then use the serial number to find out the Smith & Wesson date manufactured for your particular gun. Keep in mind that many Smith and Wesson guns produced before 1957 did not have a serial number stamped on them. These older guns will take a little more effort to find out their history. For those Smith Wesson with serial numbers, see the pictures below to find where to look.

S W Serial Numbers Chart

Smith Wesson Serial Numbers - Revolvers


Smith And Wesson 586 Nickel For Sale

Smith Wesson Serial Numbers - Pistols

There are some exceptions to the locations shown above for certain S&W pistols. On the Sigma series and the SW99 models, you will find the serial number in the locations shown in the pictures below.

Smith Wesson Serial Numbers - Sigma Series


Smith Wesson Serial Numbers - SW99

Smith Pre Model 10 Serial Number Lookup

Once you've located the serial number, then you can try to contact Smith and Wesson and see if they can give you an information about your particular gun like date of manufacture or other specific details. You can try to contact their customer support by phone and see if they would be willing to help you that way. If they are unable (or unwilling) to help over the phone, then you can contact them via writing with information on your S&W pistol, and they will research your particular firearm and send you a written report. You can send them a picture and they can find out more of the background on your gun along with the date manufactured. They will charge you for this service ($50 at the time this was written) and it is probably only worthwhile for older collectible guns which have no serial numbers. If you can find the serial number, then you are better off just trying to call S&W customer service first. If that doesn't work, then you could try to contact a gun shop and see if they can help you. Furthermore, some internet forums are filled with helpful and knowledgeable people that would be happy to help try to interpret the serial number on your handgun. In addition, a book such as: Standard Catalog of Smith & Wesson written by Jim Supica, Richard Nahas, published 2007, can be used to try to get more information about your gun. This book can be very helpful in finding Smith & Wesson date manufactured information and also general historical information about different S&W firearms. In fact, if you post a message on an internet group asking for help in identifying your particular Smith & Wesson gun, then it is very likely that a member of the group will use this book or something similar when they help. Thankfully, most people will probably have a newer gun with the serial numbers, and it should be relatively easy to get more background information using that number. The old guns without the serial numbers are the ones that can be a little trickier. Regarding old Smith & Wesson guns, below is an interesting video narrated by Jim Supica about an early S&W revolver given to the legendary Teddy Roosevelt.


Smith And Wesson 686-3 Serial Number Lookup

S&w 686 Serial Number Location

WWW.RC-TRUCKS.ORG - ALL RIGHTS RESERVED 2004-2014 - CONTACT US / PRIVACY POLICYDownload hashcat for windows.